McKinley

Technical Specifications

Classic Series

Top view of the Athabascan All Weather Pool model

Details

Outside Dimensions: 93’’ x 93’’ | 235 x 235 cm | 8′ x 8′
Height: 39’’ | 98 cm | 3′
Heater(Watts): NA / Euro 4000 W
Water Capacity: 449 Gallons | 1700 Liters
Dry Weight: 951 Lbs | 431 Kg
Wet Weight: 4699 Lbs | 2131 Kg
Electrical Requirements North America
(A = actual / B = breaker):

240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp Upgraded Classic
240 Volts / 6 Gauge Wire
1 Pump / A40amp / B50amp
2 Pumps / A40amp / B50amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp

Equipment Location

EcoPak

arcticspas Equipment Location McKinley EcoPak
INYE Spa Pack
arcticspas Equipment Location McKinley INYE Spa Pack

Dimensioned Drawings

Dimensioned Drawings 8'
Dimensioned Drawings 8'
Dimensioned Drawings 8'

Recommended Site Access and Preparation

CLASSIC SERIES WITH FOREVER FLOOR®

Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.

Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)